Specialised Engineering Services

Infrared Scanning & thermography

Infrared Scanning (Certified Thermography)

THERMOGRAPHY :
Detect system overloads, loose joint connections, components and switchgear failures. Infrared electrical testing finds hotspots, dangerous problems quickly. Electrical Infrared Surveys Improve Safety, Reliability & Reduce Down Time.

 Infrared electrical inspections find hot spots caused by defects in connections and components. Infrared thermography is used to find areas of excess heat so that problems can be corrected before a component fails, causing damage to the component, creating safety hazards & productivity loss.

Because increased heating is a sign of failure, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration. This is why your insurance company may have asked for an electrical infrared inspection, to find and prevent problems before they cause damage to your personnel, equipment and facility.

Conditions monitor by IR inspection Benefits of Infrared Inspection
Loose/deteriorated connections
Reduce unscheduled down time
Overloads
Increase equipment life
Open circuits
No service interruption during inspection
Unbalanced loads
Lower risks
Inductive heating
Lower repair costs
Harmonics
Increase profits
Defective equipment
Prevent catastrophic failures

Overview of Fault Rating:
0: Normal Temp. Rise 0-5 °C No action

1: Low grade Temp Rise 5-10 °C To be monitored – Plan new inspection

2: Medium grade Temp rise 10-35 °C Repair at scheduled shut down

3: Severe Temp. Rise >35 °C Repair immediately

Software used for analyzing Images:-

Recent Post

Close Menu

0